Califone M319 Bedienungsanleitung PDF herunterladen (Seite 2)

Product Compatibility

The M319 Beltpack Transmitter (and Q319

Microphone) are compatible with the PA919SD,

PA919, PA919PS PAs. They are not compatible

with the PA916 series PAs or the M-316 or Q-316

microphones.

Warranty Registration

The warranty for the M319 specically

covers use in schools, churches, and business

& industry applications, unlike consumer

electronic products. This is critical to help avoid

lost class time due to “down” equipment and

helps stretch budgets.

Califone warrants the M319 to be free from

defective material and workmanship for one

year from the purchase date. Our “Project

Intercept” Customer Satisfaction program will

replace defective parts and repair malfunctioning

products under this warranty when the defect

occurs under normal use, provided the unit is

returned to our factory via prepaid transportation

only after the factory issues an RA

(Return Authorization) number which

must be clearly written on the outside

of the shipping box.

All Damage Claims Must Be Made

With The Freight Carrier

Notify the freight carrier immediately if you

observe any damage the shipping carton or

product. Repack the unit in the carton and

await inspection by the carrier’s claim agent.

Notify your dealer of the pending freight claim.

Returning your unit for service or repairs

Should your unit require service, contact your

dealer or our Customer Service Department

directly via email ([email protected]), or

by phone at 800-722-0500 / 818-407-2400 to

rst obtain a Return Authorization (RA) number

before sending it back to Califone.

Damage Requiring Service

The M319 should be serviced by

qualifed service personnel when:

• Objects have fallen on it or liquid

has been spilled onto it

• It has been exposed to rain

• It does not appear to be operating

normally or exhibits a marked

change in performance

• It has been dropped or the

enclosure damaged

All shipments to Califone must include the

RA number clearly marked on the exterior of

the shipping carton and must shipped prepaid.

C.O.D. shipments will be refused and returned

at your cost.

Servicing

The user should not attempt to service

the M319 beyond that described in these

operating instructions.

Operating Instructions:

The microphone frequency must rst be set to

the same frequency as the receiving PA.

1. Open th battery cover and insert a 9V battery

(not included) into battery compartment.

Close the battery cover.

2. Adjust the volume knob to minimum.

3. Connect one of the Califone microphones

(shown on pages 3 & 4) to the 3.5mm

mic input jack. The M319 can accept

dynamic or electret microphones.

4. Turn on the M319 power switch. The LCD

will display the current transmit channel.

5. To change the transmit channel:

• Use a pen to hold the channel down 

button for about 3 seconds.

• The transmit channel will begin to ash

on the LCD.

• Release the down button. 

• Then use the up/down buttons to change

to the desired transmit channel.

• After about 3 seconds the transmit

channel will be set and the channel on

the LCD display will be solid.

• Make sure the transmit channel is not being

used by any other transmitters in the area or

there could be audible interference. If there

is any interference or distortion, try using a

dierent channel.*

6. Set the Califone receiver to the same

channel as the transmitter.

7. Turn on the receiver and rst adjust its

volume level.

8. Then turn the M319 on and adjust its volume

level to the desired level.

* Since the PA919SD and PA919 each have

two built-in wireless receivers, make sure the

corresponding M319 (or Q319) transmitters are

set to dierent frequencies (one for

each channel).

Power Adjustment (Optional):

1. The power output of the M319 can be

adjusted between low (5mW) and high

(10mW) power settings, depending on the

level of interference or the range of required

transmission (low power up to 40’/high

power up to 200’). When there may be

other PA products used in neighboring or

adjoining rooms, using the low setting will

reduce the occurrence of experiencing

any interference.

2. With the power o, simply change the

transmit power by moving the switch to

the desired setting.

LM-316

CM-316

Specications

Carrier Frequencies 902 ~ 928 MHz (16 channels)

Modulation FM

Frequency Stability ±5KHz

Transmitting Power Switchable: 5dBm / 10dBm

Spurious Rejection >55dB

AF Modulation Depth 20K (AF=1KHz50MV)

Volume Code Modulate Depth 3.5K ± 0.5K

AF Frequency Response 80HZ~18KHz (±3dB)

S/N >90dB

Distortion <1% (AF=1 KHz)

Dynamic Range >90dB

Transmission Distances High setting – approximately 200 feet

Low setting – approximately 40 feet

Operating Voltage DC 6V~9V

Current <42MA

Safety / Compliance Testing FCC, RoHS

Battery Requires 9V battery (not included)

Operational Temperature -10

C to +60

Input Jack 3.5mm

NM-316

visit us online at califone.com | califonepro.com

OE-316

HBM-316

M319_manual.indd 2 6/22/09 1:11 PM

1 2

Beltpack Transmitter 1
Owner’s 1

Kommentare zu diesen Handbüchern

Keine Kommentare

Califone M319 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern